Home - CNC Machining Services - Stainless Steel CNC Machining

Carbon Steel CNC Machining Service

Get custom carbon steel parts machined to your drawing, from one-off prototypes to repeat production runs. XC Machining works with common grades including 1018, 1020, 1045, 1215, 12L14, and A36 for brackets, shafts, housings, fixtures, manifolds, and other precision components.
Stainless Steel CNC Machining - XC Machining

Carbon Steel in CNC Machining

Carbon steel gives you high strength, rigidity, and durability at a relatively low material cost. Low-carbon grades such as 1018 and 1020 machine and weld well, while medium-carbon grades such as 1045 provide higher strength and can be heat treated for demanding mechanical parts.

Unlike stainless steel, carbon steel does not naturally resist corrosion, so exposed components often benefit from black oxide, nickel plating, painting, powder coating, or another protective finish. XC Machining supports carbon steel across CNC milling, turning, drilling, threading, and precision finishing operations. XC currently lists carbon steel among its supported materials and offers finishes including black oxide, electroless nickel plating, brushing, painting, and powder coating.

PropertyCarbon Steel CNC Machining
Common Grades1018, 1020, 1045, 1215, 12L14, A36
Price$
Typical Lead Time5–10 business days
Minimum Wall Thickness0.8 mm
Standard Tolerance±0.125 mm (±0.005 in)
Tighter FeaturesDown to ±0.005 mm where geometry allows
Maximum Part SizeUp to 2,000 × 1,500 × 800 mm
Typical FinishesAs-machined, black oxide, nickel plating, brushing, painting, powder coating
Stainless Steel CNC Machining - XC Machining

Carbon Steel Grades

1018 Carbon Steel CNC Machining

Our go-to mild steel for general-purpose machined parts. 1018 offers a useful balance of strength, machinability, weldability, and cost. It works especially well for shafts, pins, fixtures, brackets, spacers, and machine components.

Tensile Yield (MPa)
440
Fatigue Strength (MPa)
370
Elongation at Break (%)
15
Hardness (Brinell)
126 HB
Density (g/cm³)
7.87

1020 Carbon Steel CNC Machining

1020 is another versatile low-carbon steel with good forming, welding, and machining characteristics. It is commonly selected for bushings, shafts, mounting components, structural parts, and general machinery where extreme hardness is not required.

Tensile Yield (MPa)
420
Yield Strength
350
Elongation at Break (%)
15
Hardness (Brinell)
121
Density (g/cm³)
7.78

1045 Carbon Steel CNC Machining

1045 contains more carbon than 1018 and 1020, giving it higher strength and better wear resistance. It is a practical choice for shafts, gears, axles, studs, machine components, and parts that may require flame, induction, or conventional heat treatment.

Tensile Yield (MPa)
655
Yield Strength
515
Elongation at Break (%)
15
Hardness (Brinell)
179
Density (g/cm³)
7.87

Advantages and Limitations of Carbon Steel

Carbon steel is a strong, cost-effective choice for many machined parts, but it isn’t the right material for every application. Here’s where it performs well and where it falls short.

 
Advantages
  • High strength and rigidity — suitable for structural and load-bearing mechanical components.
  • Cost effective — generally less expensive than stainless steel and many specialty alloys.
  • Good machinability — especially grades such as 1018, 1215, and 12L14.
  • Good weldability — low-carbon grades including 1018, 1020, and A36 weld particularly well.
  • Heat-treatable options — medium-carbon grades such as 1045 can be hardened for greater strength and wear resistance.
  • Widely available — common grades are available in plate, bar, tube, and other stock forms.
  • Broad finishing options — black oxide, plating, paint, powder coating, and other treatments can improve appearance and corrosion protection.
Limitations
  • Low natural corrosion resistance — unfinished carbon steel can rust when exposed to moisture.
  • Higher weight than aluminum — not ideal when reducing mass is a primary design goal.
  • Harder grades increase machining time — higher-carbon or heat-treated materials cause greater tool wear.
  • Hot-rolled stock may have scale — A36 and similar materials can require additional facing or finishing.
  • Not every grade welds equally well — free-machining steels such as 1215 and 12L14 are usually poor choices for welded structures.
  • Heat treatment can affect dimensions — critical features may need finish machining or grinding after hardening.
  • 12L14 contains lead — this can restrict its use in regulated or environmentally sensitive applications.
Get In Touch

Bring Your Designs to Life with XC Machining

Experience precision engineering with XC Machining. From detailed prototypes to high-volume production, we’re here to turn your concepts into reality. Contact us today to discuss your project needs!

Get In Touch With Us!
Prompt response guaranteed within 12 hours

Carbon CNC Machining FAQs

6061 for most work. It machines cleanly, welds, anodizes evenly and costs less than the high strength grades. Pick 7075 only when the part carries serious load, and 6063 when the finish matters more than the strength.

Standard is ±0.125 mm (±0.005 in). We can go tighter on specific features if you call them out on the drawing, though tight tolerances across a whole part add cost without adding function.
Yes. Type II anodizing takes dye well in black, red, blue, gold and clear. Note that anodizing adds 5 to 25 μm per surface, so mask any feature with a tight fit.
Under 10 days for most orders. Simple prototypes move faster. Lead time depends on alloy availability, part complexity and the finish you specify.
7075, by a wide margin. Yield strength is 503 MPa against 276 MPa for 6061. The trade is cost, slower machining and poor weldability, so 7075 belongs on aerospace and high stress parts rather than general brackets and housings.
0.75 mm. Thinner walls chatter under the tool and distort once the part comes off the fixture. If your design needs thinner, send it over and we’ll tell you whether it will hold.
Yes. ADC12 arrives as a die casting and we machine the critical features afterwards, which is standard for automotive parts and electronic housings.