Home - CNC Machining Services - Nylon CNC Machining

Nylon (PA) CNC Machining Service

XC Machining offers nylon (PA) CNC machining for US product teams, from custom prototypes to functional plastic parts. Nylon resists wear, rubs with low friction and stays tough at low weight. That is why industrial machinery teams use it for gears, bushings, bearings and rollers.

Nylon CNC Machining - XC Machining

Nylon (PA) in CNC Machining

Nylon, also called polyamide (PA), is a versatile engineering thermoplastic. It has strong mechanical performance, wear resistance and low friction. It is a lighter alternative to metal for parts that need durability, impact resistance and smooth movement.

Nylon mills, turns, drills and threads into precision gears, bushings, rollers, spacers and mechanical housings. Grades differ in stiffness, toughness, dimensional stability and moisture resistance, so the grade choice matters.

Our CNC machining page covers the process, and the materials page lists every other metal and plastic we cut. For a rigid, low cost housing, look at ABS. For tighter dimensional stability, look at POM.

GradesPA6, PA66, PA12, PA6-G, PA66-GF30
PriceLow
Lead timeUnder 10 days
Minimum wall thickness0.75 mm
Tolerance±0.125 mm standard, down to ±0.005 mm on tight features
Maximum part size200 × 80 × 100 cm
Nylon CNC Machining - XC Machining

Nylon Grades

Each card gives the use first and the figures after it. The figures are typical published values for the grade. Units are MPa, Rockwell R hardness and g/cm³. Ask XC for the exact grade datasheet or mill certificate for certification.

Nylon PA6

PA6 is a tough, wear-resistant engineering plastic. It offers good impact strength, machinability and mechanical performance. Gears, rollers, bushings, guide rails and industrial parts that need durability and low friction use it.

Tensile Yield (MPa)
80
Fatigue Strength (MPa)
25
Elongation at Break (%)
50
Hardness (Rockwell R)
119
Density (g/cm³)
1.14

Nylon PA66

PA66 gives higher stiffness and heat resistance than standard PA6 grades. Its wear resistance and mechanical strength suit precision gears, bearing parts, spacers and structural plastic parts.

Tensile Yield (MPa)
82
Fatigue Strength (MPa)
30
Elongation at Break (%)
50
Hardness (Rockwell R)
120
Density (g/cm³)
1.14

Nylon PA12

PA12 absorbs less moisture than PA6 and PA66. It also has good chemical resistance and excellent toughness. Precision parts, fittings and mechanical parts that need better dimensional stability in humid conditions use it.

Tensile Yield (MPa)
50
Fatigue Strength (MPa)
20
Elongation at Break (%)
200
Hardness (Rockwell R)
105
Density (g/cm³)
1.02

Advantages and Limitations of Nylon

Nylon CNC machining offers strong mechanical performance, durability and versatility. Knowing its benefits and limits helps you pick the right material for your project.

Advantages
  • Excellent wear resistance.
    Nylon performs well in sliding and moving parts, which suits gears, bushings and bearing uses.
  • Low friction.
    Its low coefficient of friction cuts resistance between moving mechanical parts.
  • Lightweight material.
    Nylon is a lower-density alternative to metals and reduces part weight.
  • Good mechanical toughness.
    Some nylon grades give excellent impact resistance and hold up under repeated loads.
  • Electrical insulation.
    Nylon insulates well enough for industrial and electronic parts.
Limitations
  • Moisture absorption.
    Nylon absorbs moisture, which can change its size and mechanical properties over time.
  • Thermal expansion.
    Nylon expands more than most metals when the temperature changes, so tolerance planning needs care.
  • Lower rigidity than metals.
    Nylon can deform under high loads or sustained stress, especially at high temperatures.
  • Heat sensitivity during machining.
    Too much cutting heat can deform the material or hurt the surface.
Get In Touch

Bring Your Designs to Life with XC Machining

Experience precision engineering with XC Machining. From detailed prototypes to high-volume production, we’re here to turn your concepts into reality. Contact us today to discuss your project needs!

Get In Touch With Us!
Prompt response guaranteed within 12 hours

Nylon CNC Machining FAQs

Yes. Nylon is widely used in CNC machining because of its toughness, wear resistance, low friction and light weight. It suits gears, bushings, rollers, spacers and other functional plastic parts. Send a drawing and we will confirm the grade and the setup for your part.

The best nylon grade depends on the job. PA6 gives good toughness and wear resistance. PA66 offers more stiffness and heat resistance. PA12 absorbs less moisture and holds its size better in humid settings. If you are unsure, send the drawing and we will suggest a grade.

Yes. Nylon machines to precise dimensions with suitable tools and controlled parameters. Our standard tolerance is ±0.125 mm (±0.005 in), and tighter limits depend on the grade. Moisture absorption, thermal expansion, part shape and grade all affect tight tolerances. Mark the critical features on the drawing and we will plan the setup around them.

Nylon is the better choice for light parts, low friction, electrical insulation or quieter running. Metals are the better choice when you need higher stiffness, strength or heat performance. Neither wins every time. The load and operating temperature decide, so send the drawing and we will advise.